Challenger 10’2” Modular SUP/Kayak Hybrid
Stand or sit. Paddle your way.
A rigid board without the roof rack.
Engineered for performance.
Designed for convenience.
The Challenger combines the stability of a rigid stand-up paddle board with the versatility of seated paddling in one modular design.
Be paddle-ready in minutes with no tools or pumps required. Simply connect the three sections, secure the latches, and you're ready to go. The detachable top-mount fin installs once the board is afloat, helping protect the fin during transport and setup.
Keep smaller belongings close by and store them inside one of the three sealed storage compartments. When you're done paddling, select accessories stow conveniently inside the board.
- Rigid construction delivers stability and control
- Modular design breaks down for easier transport and storage
- Sets up in under 3 minutes without tools or a pump
- Top-mount fin installs after launch, protected during transport
- Three compartments hold essentials while on the water
- Shoulder strap, fin, leash and footrest stow neatly inside the board
- (1) Challenger 10'2" Modular SUP/Kayak Hybrid
- (1) Convertible Paddle Set
- (1) Top-Mount Fin*
- (1) Shoulder Strap*
- (1) Ankle Leash*
- (1) Seat
- (1) Footrest
- (1) Water-Resistant Pouch*
- (1) 5/16 Wrench*
- (10) Latch Caps
- (4) Bungee Hooks (bungee cords not included)
*Select accessories are securely packaged and stored inside the tail module’s built-in storage compartment. Simply remove the black rubber hatch cover to access them upon unboxing.
Board Dimensions
- Length: 10' 2"
- Width: 32"
- Thickness: 6"
- Weight: 44.04 lbs
- Weight Capacity: 230 lbs
Section Dimensions
- Nose: 41.375" / 11.4 lbs
- Center: 44.625" / 20 lbs
- Tail: 40.375" / 12.64 lbs
Additional Specs
Material: High-density polyethylene (HDPE) — rigid, durable, and built for real use.
Setup Time: Under 3 minutes. No tools or pump required.
Storage: Largest section measures 44.6″. Modular sections make storage and transport easier.
Design Origin: Patented modular system, made in North America.
The Challenger is sold as a non-motorized stand-up paddle board (SUP) and does not include a Hull Identification Number (HIN). Under U.S. Coast Guard guidance, non-motorized stand-up paddleboards are exempt from the manufacturer's HIN requirement.
Registration requirements vary by state and intended use. Some states may classify the Challenger differently when operated in its seated kayak configuration and may require registration or additional identification.
Before purchasing, please check with your state's boating or watercraft authority to confirm the requirements for your intended use, particularly if you plan to operate the Challenger with its kayak seat.
If you have questions, please contact us before ordering. We're happy to provide additional product information.
All-In-One Bundle
- Three-piece rigid paddle board
- Ankle leash
- Shoulder strap
- Cup holder
- Seat
- Internal storage compartments (3)
- Convertible paddle set
- Paddle holder straps
- Footrest
- Top-mount fin
- Bungee hooks (bungee cords not included)
How to Assemble